So, it’s almost Fall right?
Like, so close to Fall that a pretty, glittery wreath is totally necessary at this point.
I mean, when do we not need a new wreath, you know, never.
So, I am working (yeah on like 5 ongoing projects at the same time because we love
a challenge right?) on getting the front porch ready for Fall. I will be sharing a bit more
soon about how I did a super easy deep clean and lifted a layer of summer use and dirt
right off. But in between cleaning the porch, light fixtures, and making a few new pretty
things for my Fall porch decor, a wreath had to be the first thing that I finished.
An easy DIY wreath is the best wreath in my book, so I looked around and found an
awesome $1 wreath base from Dollar Tree, then headed to Jo-Ann’s for some paper
and glitter. With the paper being on sale this week 5/$1 and glitter tubes only .99 cents,
it was a super thrifty project. Here is what I used to make my Paper + Glitter Fall Wreath:
- Wreath base (easy to find at your local dollar store or craft supply store)
- 12-15 sheets of cardstock weight scrapbooking paper
- Gold & copper glitter
- Mod Podge
- Hot glue
- Scissors
Directions:
Begin by cutting leaf shapes out of your paper, and set aside. Once you are done cutting out
your leaves, use a CD case or something similar to bend and create the fold in each paper
leaf. Once you have finished prepping the leaves, brush a bit of Mod Podge, and shake coordinating
glitter over the end of each leaf.
Let the glue dry, and glitter set on the leaves (I left my green leaves without glitter) and begin
gluing them to the wreath base going all in the same direction. I used a small dab of hot glue on
the back of each, and started with green, working my way around the entire wreath. Next I begin
to layer in each color & fill in any bare spots with glittery leaves.
They are so pretty, I love the simple addition of glitter tipped leaves to give the paper a new
dimension.
I ended up using about 13 sheets of the cardstock I bought, and have a ton of glitter left over.
This wreath ended up being less than $5 to make since the base was only $1. I love that the
colors are perfect for early Fall decorating, but I can use it all the way through Thanksgiving.
Abbie’s room is almost done, I am just working on a fun gallery wall above her dresser,
some final touches. I hope to be able to share it with you next week if I can.
School is starting in less than 2 weeks, and I feel myself quickly running out of time to
get ready for structured days and early mornings again.
How do you usher in Fall every year in your home? Maybe it’s breaking out the crock pot,
stocking up up on baking supplies, or hanging some Fall garlands, I would love to hear what
your favorite ways to celebrate Fall are!!
Thank you so much for reading!!
Have a blessed & creative week-
http://www.savvysouthernstyle.net/
41 Responses
Stopping by from Inspiration Monday link party. Love the glitter, it adds so much!
Thank you Melinda!!
xo, Tanya
Soooo adorable…love it! pinning! Thank you so much for sharing with us at Twirl and Take a Bow! ox
Will you please explain how you used a CD case to bend the leaves? TIA
Amazing and beautiful output. Thanks for sharing. I love this
Really nice blog. Thanks for sharing.
Hello! This is my first comment here so I just wanted
to give a quick shout out and say I really enjoy reading through your articles.
Can you recommend any other blogs/websites/forums that go
over the same topics? Thanks for your time!
For newest news you have to go to see world-wide-web and on web I found this web page as a finest web site
for most up-to-date updates.
Pretty nice post. I just stumbled upon your weblog and wished to say that I have truly enjoyed surfing around your blog posts.
After all I’ll be subscribing to your rss feed and I hope you write again very soon!
I think this is a real great article post.Thanks Again.
9zMJRd Really appreciate you sharing this post.Much thanks again. Much obliged.
i love interior. These article is very helpful and informative.
You have a very creative and amazing ideas to make your home or living room make it perfect and beautiful. Great job !!
It remind me my time when I go to my mom’s best friend home with my mom in her best friend daughter marriage. beautiful and creative.
Thanks For Sharing this Information!! We provide routers technical help, If you have any issues regarding the Tp-Link router visit our site. We are 24 hours available.
Thanks for sharing a great post. We provide routers technical support, If you have any query regarding the Nighthawk router, visit our site.
Ap.Setup is an offline website that you will be able to use only when you are connected to your Wavlink Extender Setup page. So, it doesn’t matter if you have a repeater, a modem, an outdoor access point, and so on, all you have to do is connect to the network and then access the login tab.
Amazing ideas!! Very informational
Great ideas for DIY projects!
great DIY projects! thank you for sharing
Thankyou so much
If you want to improve your home network then you should install the Linksys Velop system. It is a mesh WiFi system consisting of a primary node and other nodes. On the Linksys Velop system there are some lights, which tell the users about the functions of Linksys Velop. But, nowadays, users face the Linksys Velop red light, it does not sound good on the system, and it indicates the issues related to mesh WiFi. If you also face a red light on Velop then you need to fix it.
Thank you so much. Great work all around, keep sharing more informative post with us.
In case you are also one of those users who are unable to make the most of their Amped extenders because of the issue at hand, then it is recommended that you walk through the top three troubleshooting hacks highlighted in this guide. They will surely be of some help.
The Netgear extender is the ideal choice for millions of people around the world to get a constant and reliable internet connection throughout the house. Netgear extenders have many flawless features that enhance the internet experience of the users. But, as an electronic device, the Netgear extender also creates the issue. As per the study, it is seen that 9 out of 10 people face the Netgear extender keeps dropping internet connection issues after performing the Netgear WiFi Extender setup. If you are also one of them and wonder know the reasons to fix the issue, then you have come to the right place.
Today, in this guide, you will get all the information you need to fix the IP address error. So, we suggested you don’t skip the points from the reading. Otherwise, you are not able to access the IP of the Victony extender.
Well, that generally happens when the user does not pay attention to the pending firmware update right after the Wavlink WiFi extender setup . Chances are that you’ve also got your name engraved on the list of those users. But, considering that you are reading this post right now, we want you to stand out by implementing the hacks provided in this guide.
The Netgear Orbi Light is a mesh Wi-Fi router that combines the latest in wireless technology with an intuitive user interface and simple setup.
A question that arises in minds of many people is how to execute the process. Are you one among them? It is time you take the question out of your mind since we are here to assist you with that.
I really appreciate the way you have written this blog. It is very interesting Topic, Thanks for its.
If any person want guidance of wifi device then you can read our blog Resolve: Netgear Extender Not Working Issue
Consider it as a last try that you need to give in order to fix the routerlogin not working issue. We can say for sure that one of the hacks will be able to rescue you.
Get professional AWS Training in Chandigarh from industry experts. Work on Live projects, quality training guaranteed, 100% placement assistance & achieve goals. Our AWS Training in Chandigarh by Cloudzone helps you determine the key concepts, current trends and best practices to be engaged with the AWS architecture.
AWS Training in Chandigarh
Want to learn Google Cloud Platform? I recommended you to join Google Cloud Platform Course In Chandigarh because their trainers are highly qualified and they have a good knowledge of their field.
GCP Training in Chandigarh
Android training in Chandigarh by CBitss. Deploy your app on Google play store. Work on latest version of android and learn using Kotlin for coding. Enroll for our Android app development course in Chandigarh. Call or Whatsapp NOW @ 9988741983.
Android Training in Chandigarh
Data Analyst course in Chandigarh is provided by CBitss. The best institute for Python, Data Science and data analytics courses in Chandigarh”
Data Analyst Course in Chandigarh